HomeFaulted Circuit IndicatorsSupportContact EdisonAbout Edison FCILinks
Single Phase Faulted Circuit Indicator Products


EC-10


A single-phase faulted circuit indicator designed for underground applications. It is for use on insulated cable, and is manually applied. The two bails are secured with a tie wrap and the unit is secured to the cable with a large tie wrap which is also included with each unit.



EC-11


The EC-11 faulted circuit indicator is a single phase, cable mounted unit with remote indicator, designed for use on the cable as well as the elbow. It is manually applied, and is used for underground applications in pad mount transformers. The optional mounting kit provides easy field installation in a transformer housing.



EC-14


The EC-14 is a single-phase cable mounted unit designed for use on either insulated or uninsulated cable. The unique screw opening mechanism allows for application to energized cable with a hot stick. The EC-14 is suitable for underground or overhead use and incorporates a silicon rubber pad, which prevents the unit from sliding on a cable or skating down the catenary in overhead use.



EC-15


The EC-15 is a single phase, cable mounted unit with remote indicator, designed for use on insulated cable. The unique pull over bail sensor self mounts and has no loose parts. The unit is for underground applications and can be installed while using insulated gloves, if safety rules permit. The optional mounting kit provides easy field installation in a transformer housing.



EC-16


The EC-16 faulted circuit indicator is a single-phase hotline unit designed for use on the folded back concentric neutral or directly on the elbow. The unique pull over bail sensor self mounts and has no loose parts. The unit is for underground applications and can be installed while using insulated gloves, if safety rules permit.



EC-20


The EC-20 faulted circuit indicator is a single phase, secondary voltage reset unit with remote indicator. It is designed for use on insulated cable, underground, where low current draw prevents current reset. It is also available with standard bail as on the EC-IO and the screw down mechanism as on the EC-14. The unique pull over bail sensor self mounts and has no loose parts. The unit can be installed while using insulated gloves, if safety ruled permit. The optional mounting kit provides easy field installation in transformer housing.



FCI's Options


All external metal hardware is made of stainless steel for long maintenance free life. We offer a variety of mounting brackets for remote indicating FCIs. Cable springs, clamps and tie wrap clamps for positioning FCIs onto the conductor. In addition, we offer a viewing kit made of LexanŽ plastic to provide additional protection for the remote indicating FCI's face from vandalism.



[ Faulted Circuit Indicator Main Page | Single Phase FCIs | Three Phase FCIs | FCIs Specs. & Response Curves ]
EDISON CONTROLS F.C.I., INC.
32091 Broken Branch Circle Suite B
Spanish Fort, Al 36527 USA
800-328-5833 / 251-625-1116
Fax 251-625-1117
Email:sales@edconfci.com


All content Copyright
© Edison Controls F.C.I., Inc., 2011
All Rights Reserved
Web site: http://www.edconfci.com
TargetMarket Inc. Email: webmaster@edconfci.com